Guides

What Is A Good Overclock Setting for Ryzen 5 3600?

AMD’s Ryzen 5 3600 has plenty of power in all aspects of performance, so it’s no surprise that overclockers are interested in finding out how high they can push the clock speed on this six-core, 12-thread CPU. But what is the best Ryzen 5 3600 overclock setting in case just if you are curious? Is there even such a thing? Can you push it too far? As always, we’ll help you get to the bottom of the issue and leave you with some answers and recommendations on your next overclock setting. So what is a good overclock setting for Ryzen 5 3600?

Which Ryzen 5 3600 overclock setting should you use? This all depends on several factors, such as your cooling solution, your ambienttemperature, and the desired level of stability. With that in mind, this article will cover the best Ryzen 5 3600 overclock settings based on each scenario. Here’s what we’ll cover in this guide.

How Do You Overclock AMD Ryzen 5 3600?

As with any computer system, you can overclock your AMD Ryzen processor. By overclocking, you are making the processor run faster than its original specifications to increase performance. When overclocking your processor, you will want to try to get it as close as possible to the voltage that it comes with at a default state. 

You can increase the frequency by about 100MHz at a time, and then you will want to check stability with Prime95 or Passmark BurnInTest until it becomes unstable and cannot continue testing. For overclocking an AMD Ryzen R5 3600X: You should be able to push up the CPU speed of this particular processor by around 35-50% without incurring any errors. 

You can do this by entering into BIOS (hit the DELETE key during startup) and increasing the multiplier from 37x to 42x. There’s no need to mess with voltages when doing so. But be sure to monitor temperatures closely after overclocking as they may rise. However, if you’re only interested in gaming, I recommend getting a better graphics card than trying to overclock your processor.

Which Settings Should I Tweak First on my Ryzen 5 3600

When overclocking your Ryzen 5 3600, you may want to tweak your Core Clock first. You can do it by increasing the bus frequency. The following Intel R3/4 platform can handle up to 133-142MHz. You may then want to look at CPU voltage and voltage settings in BIOS (an increase from 1v to 1.35-1.40v). 

Your next option would be adjusting your power limit, which will help adjust thermal load and temperature. Once you are comfortable with those, you can increase your memory clock speed, which will bring it closer to 3000 MHz per second but comes with a high overclocking risk. One thing that people forget when they overclock their CPU is that they need to know how hot it gets. 

You should install software such as HWMonitor or AIDA64 before starting any overclocking journey to monitor the system temperatures. Remember, don’t get too hung up on overclocking because there are many other ways to get better performance out of your computer.

What is the Optimal Memory Frequency for overlocking?

The optimal memory frequency will depend on your processor and motherboard. For those looking to overclock the chip, the most popular frequencies are DDR4-3200 and DDR4-3466. Some boards can only take one of these, which means you should limit your search to just that particular speed. 

To start overclocking, you’ll need A CPU capable of overclocking (these days, this is almost all processors), a motherboard with built-in overclocking support that supports memory above 3200Mhz, and some knowledge about overclocking and skills. 

What is an Optimal CPU Voltage for overclocking?

The clock frequency is not the only factor that determines the performance of your CPU. The amount of voltage that the chip receives also influences how fast it will work. There are many good resources online that can help you calculate what voltage your CPU needs to be at its best, so we recommend doing some research before overclocking. 

You’ll also need software to help monitor and log things like clock speed, temperatures, voltage levels, and so on. If you need extra cooling or want reassurance that everything will be okay, you might want to invest in some aftermarket cooling components too. That way, if something goes wrong during an overclock attempt, you can easily salvage some of the parts.

Why is under-volting important?

Undervolting may be required if you’re aiming to keep your CPU running at high speed without having to worry about thermal throttling, which will result in increased performance. If you don’t want to overclock, it’s not an issue. Undervolting has the added benefit of reduced power consumption and potentially higher battery life. 

The most common culprits are too-high BCLK values or overclocking your CPU and GPU with aftermarket cooling solutions. While it’s important to be aware of how much voltage your motherboard can handle, it’s best not to exceed that limit just because there are more overvoltage options available below that ceiling. 

A 1.4v setting should be perfectly safe for your Ryzen 5 3600 as long as you’re using a well-ventilated PC case (a small number of fans blowing fresh air across your motherboard). You should also avoid any settings exceeding 1.5v when overclocking by increasing voltages manually on the BIOS screen. Remember that these settings are about the CPU Core Voltage (Vcore), and they do not take into account other components such as memory, graphics card, etc.

How to Undervolt an AMD Ryzen 3000 CPU?

Overclocking can be fun, but if you don’t do it right, it can also fry your chip. If you’re looking to overclock and manage the power consumption of your CPU, you first need to know how to undervolt an AMD Ryzen 3000 CPU. 

If you want to undervolt your Ryzen processor to achieve the best Ryzen 5 3600 overclock setting, you first need to download the clock tuner. Install it in your system, open it and go to the Tuner tab. Click on Diagnostic and wait got 5 to minutes for the process to complete. Once done, set the settings mode to advance and slightly change the reference voltage. 

Now, click on Tune, which will let the program settle down according to these settings, and run the Cinebench R20 on its own. Check if the system appears stable; if so, you can further do another offset. However, if not you can do two things. Either increase the voltage value of the system or reduce the reference frequency and click on Tune again to Tune the system. 

Once you are satisfied with the result click on the check stability option just to make sure that everything is fine. And your Ryzen processor is undervolted, and you are good to try overclocking your processor now. 

How to Set Your Memory Frequency?

As long as you are working within the parameters of the individual motherboard’s requirements, there are many different ways to overclock your system. However, before overclocking your memory frequency, you will want to make sure that you meet these basic requirements: 

  1. You have 16GB or more RAM installed in the system.
  2. You are using an X470 motherboard with the AMD Ryzen 2000 series CPU installed. 
  3. The BIOS has been updated to support greater speeds than 2400MHz. 

Now to overclock your memory frequency, open up your BIOS menu by pressing F2 on your keyboard during boot up. Next, navigate to the Advanced Memory Settings tab, then press Enter. From here, you will see two lines of text separated by a slash /. 

Below this slash is an option labeled DRAM Frequency. By default, it should be set at 2400MHz. If it isn’t already set at 2400MHz, then enter it now and press Enter. Next, use the +/- keys on your keyboard to increase or decrease the value until you reach 2800Mhz-3000Mhz. 

Note that if this setting causes errors in Windows 10, then adjust accordingly until Windows 10 starts without any errors.

BIOS Tweaking (What To Tweak, When to Tweak)

Let’s jump right in. If you’re looking to overclock your CPU, the first thing you need to do is make sure that it has a BIOS setting to overclock (some CPUs don’t). Most CPUs on the market do have this ability in their BIOS. 

You’ll want to know what BCLK and CPU ratio your CPU can handle before overclocking though. This means you’ll need to read reviews or consult with others who have more experience overclocking before attempting anything yourself. Once you know how high of an overclock your processor can handle and what the default settings are, go ahead and experiment with some increases from there.

Start by increasing the BCLK one step at a time until things begin crashing or booting issues start happening. Then, take note of what the CPU ratio was, which caused the problems. From here, you’ll want to back off your overclocking just enough so that you’re below this limit, as we call it. 

With these two numbers now in hand, you should be able to find a stable and best Ryzen 5 3600 overclock setting for your system. It’s worth noting that higher speed RAM can also help increase the performance of your Ryzen 5 3600 because data will be transferred quicker between memory and the CPU when gaming or working with intensive software.

What do you need to overclock the Ryzen 5?

There are not a lot of things that you will need. All you need to know is the best Ryzen 5 3600 overclock settings, along with two core components. These include a solid cooling system, which can be either a liquid cooling system or an air cooling system, and a reliable motherboard. With these things, you will be able to overclock your system in no time. 

How to overclock Ryzen 5 3600 in BIOS?

Knowing the best Ryzen 5 3600 overclock settings does not come in handy if you have no idea how to overclock the system. There are various ways through which you can overclock your processor but the easiest way to overclock ryzen 5 3600 is by using BIOS. Follow the steps below if you want to overclock the system using BIOS.

  1. Switch your system off. 
  2. Turn the device on again. 
  3. While the booting process is taking place, press the F2/F10 and DELETE key repeatedly, which will open the BIOS control center for you on the PC. In there, you can find the overclock setting, using which you can efficiently overclock your processor. 

How Important Is Airflow Control?

Dust bunnies, hair, dead skin cells–any of these things can impede airflow and thus cause your PC to run hotter than it should. The best way to get around this is to be proactive about keeping the computer dusted and monitored. 

Some people also recommend removing the chassis cover before turning on the PC, which helps allow extra airflow in and out of the case. If you’re going all-out with overclocking, you might want to invest in additional cooling equipment like liquid or LN2 (liquid nitrogen). This will enable you to push your PC even further than would otherwise be possible without fear of burning up your system.

A good airflow allows you to have a lag-free, smooth performance without causing any damage to your system. It especially comes in handy in devices that you use for extensive hours like gaming laptops or professional laptops for work. Thus, keeping a check on the airflow of the device will always be helpful for you.   

Tips For Getting a Stronger Hold on Your Heatsink Fans

One way to make sure your heatsink has no problem with ventilation is to buy aftermarket fans that fit onto the heatsink. The easiest way to find fans that will be compatible with your heatsink is by going to the manufacturer’s website and looking at the specifications of the heatsink. 

Some heatsinks will come with one or two stock fans, while others come with more than two, making it necessary to purchase more fans if needed. After finding out how many fans comes with your chosen model, simply go to an online store and search for fan clips that correspond with the number of fan holes in your motherboard. 

For example, if you have a motherboard with five fan-mounting holes. You’ll need at least five clip-on and clip-off clips so that you can use all five slots properly. Find the right one for your device and install it to get a better cooling system for your device. 

Conclusion

It’s worth taking the time to learn the nuances of overclocking your hardware. Especially if you want to squeeze the most performance out of your system and experience faster response times. The easiest way to overclock Ryzen 5 3600 is by knowing the best Ryzen 5 3600 overclock settings. They’ll get you where you need to be without all of the headaches or research. One thing about overclocking R5 3600 that’s important to remember is that it can void your warranty on both hardware and software.

Join The Discussion