Best mining motherboards for 2021

The Best Motherboards For Mining Bitcoin In 2022

Every PC builder understands that the motherboard is an essential element of any system, and crypto mining equipment is not an exception. Cryptocurrency mining doesn’t require costly top-of-the-line motherboards as gaming requires. It’s possible to do so with relatively low-cost motherboards. If you are serious about mining, you should purchase the best mining motherboards that support multiple graphics card configurations within its BIOS.

Most motherboard makers today have full support for cryptocurrency miners and are making boards specifically designed to increase your mining hash rates.

Unlike regular motherboards, the best card for mining has several PCIe slots, which allow users to connect a huge variety of graphics cards. Additionally, they have specifically modified BIOS configurations that are specifically for these kinds of multi-GPU arrangements.

If you’re looking to connect several GPUs, a high-quality mining motherboard can help you maximize the performance and profit that you can get from your system.

Be aware that mining rigs operate 24/7, which puts significant stress on the motherboard; therefore, don’t skimp on this crucial component. The most efficient mining motherboards can enable your mining equipment to function as a solid unit, especially when paired with top mining GPUs.

When choosing the ideal computer for mining machines, you should be aware of the amount of GPUs you’ll utilize within your mining setup and the general system stability.

Gaming motherboards are ideal for mining. But, they can be expensive and come with a lot of features that you’ll not need. However, mining motherboards specifically designed for mining generally have limited features and are designed to mine cryptocurrency.

The choices are numerous, and it could be overwhelming to select the perfect motherboard. We are here to assist you. Below we’ve reviewed some of the best video cards for mining 2022.

Best Mining Motherboards

Asus B250 mining expert

ASUS B250 Mining Expert is specifically designed to be used in mining. It has 19 PCIe slots as well as three ATX12V power connectors, which permit miners to use 19 NIVIDIA or AMP GPUs on the same motherboard. This reduces the cost of having to purchase several motherboards.

Body and Design

The board comes in packaging that has the most unusual design ever seen by ASUS. On the front, there is just the model’s name. On the back, you will find detailed information about the capabilities of the model.

What distinguishes this ASUS B250 Mining Expert unique is that it is equipped with 19 PCI lanes and support for three different power sources.

Each motherboard component works with a separate power supply, which helps maximize the hash rate.

On the front of the motherboard, you will observe two old-fashioned PS/2 keyboards, two mice 2x USB 2.0 three-way USB 3.0, HDMI, as well as one Ethernet connection.


As with all motherboards equipped with a CD drive, because having 19 PCI lanes is a significant amount of energy, ASUS created the idea of splitting the motherboard into three zones. The three zones are A, B, and C. Each zone has its ATX12V power connectors, allowing it to operate smoothly throughout the day.

Moreover, the drivers include diagnostic software that can identify what PCI express lines functioning or not. The software is a wonderful feature since it increases the efficiency of mining, and thanks to a special mining mode, you won’t need to play around with the BIOS, and you can mine right from the box.

In addition, it comes complete with LGA 1151 which supports the sixth and seventh-generation processors. However, be sure to select a CPU that supports up to 19 PCI slots.

ASUS B250 Mining Expert provides a special BIOS mode that comes with diagnostic tools. When you turn it on the first time, it clearly displays the slots that are in use and which connected video cards are in the normal state.

However, the intricacies that come with BIOS are at a lower level. On other ways, this best Mining motherboards is a basic product built around the B250 chipsets. Yet it’s an excellent motherboard to use.

ASRock H110 PRO BTC+

ASUS B250 Mining Expert is one of the best mining motherboards for 2022 as it features a design specifically for mining. It has 19 PCIe slots as well as three ATX12V power connectors, which permit miners to use 19 NIVIDIA or AMP GPUs on the same motherboard. This reduces the cost of having to purchase several motherboards.

Body and Design

Its onboard power off and reset buttons that make the board more practical to use in mining rigs. Since you won’t use an ordinary PC case, having the buttons directly on the board can be beneficial.

Furthermore, in terms of ports, the motherboards feature 1 PCIe 3.0 16×16 and 12 PCIe 2.0 x1, four USB 3.0 ports (a pair on the front and another on the back), and 4 SATA3, and 1 M.2 (SATA3).


ASRock H110 Pro BTC+ is ready to mine straight from the beginning. There is no requirement to perform any additional bios settings to enable multi – GPU mining. The hybrid GPU system is very well-liked with hardcore miners. This motherboard is able to handle up to 13 AMD and NVIDIA GPU mining in Windows10 and more.

The H110 Pro BTC+ is also compatible with the most powerful mining system, ethOS. It can mine Ethereum, Zcash, Monero, as well as other GPU-minable cryptocurrencies. Putting 13 GPUs in a single motherboard is fine, but you must realize there is nothing at no cost.

However, the fact is that Windows 10 does not accept more than 8 GPUs with similar architecture. The only way to run your 13-GPU device in Windows 10 is by having a straight-set. The new H110 Pro BTC+ seems to be a great upgrade from the previous H81 PRO. It appears as if the H110 will be just as sturdy and reliable as its predecessor.

MSI Z390-A Pro

MSI Z390-A Pro is a pretty efficient motherboard. The primary difference between the MSI Z390-A Pro and the rest of the Z390 stack is that this one isn’t designed specifically for gamers. The most significant selling point for the MSI Z390-A PRO lies in its price.

It comes with the availability of a variety of controllers, including the Intel I219V Gigabit Ethernet controller and a Realtek ALC892 HD Audio codec that handles the audio onboard.

Body and Design

The appearance is basic with a black-colored PCB that has silver patterns across it, mostly around areas around the edge of the board and around the black and silver heatsinks. The board has two PCIe 3.0 slots. The upper MSI Steel Slot coated slot operating at x16, and the other full-length slot is four.

There are also many PCIe 3.0 ports that are x1 since the Z390-A PRO comes with four ports in total. Connectivity to the rear panel is also a concern. MSI Z390-APRO has a USB 3.1 Gen2 Type-A and Type-C port and four USB 2.0 ports.  Moreover, Realtek ALC892 HD Audio Codec powers the Six 3.5 millimeter audio jacks, and an Intel II19V Gigabit network chip powers the one LAN port.


The Z390-APRO is the only MSI board with an output for D-Sub video that appears to replace the HDMI and is also available as the DisplayPort and a DVI-D input. Storage options are fairly basic on the Z390-APRO, and it is the only Z390 MSI board with just one PCIe/SATA M.2 slot.

This is further supported by a total of 6 SATA ports, which support RAID 0. 1. Five and ten arrays. As for memory capacity, the board has four RAM slots that support DDR4-4400 and capacities of 64 GB. MSI Z390-A PRO MSI Z390-APRO is MSI’s most affordable Z390 motherboard by MSI at the time of its launch, but it may be considered costly for the chipset’s entry-level model.

The motherboard comes with a good set of controllers, which raises the price. This will mean that users may have to boost their budgets for the switch onto MSI’s Z390 platform, specifically, keeping in mind similar models that were available at the time the Z370 chipset became available. However, it’s an extremely reliable motherboard, which makes it ideal for our list of best mining motherboards for 2022.

BioStar TB250-BTC Pro

The TB250-BTC Pro is the first motherboard on the market capable of holding twelve graphics cards simultaneously. It allows for an increase of 200% in the utilization of motherboards and a greater ROI.TB250-BTC Pro is among the most powerful mining motherboards that go beyond the standard offerings. It is two times as efficient as the previous model.

Body and Design

The BIOSTAR BTC250 PRO is the only device that supports older PS/2 ports that you can use with both mice and keyboards for users using KVMs to control multiple devices and a DVI output for display.

It has 4 ports: USB 3.0 Ports, 1 USB 3.0 Header, 1 USB 3.0 Header 2 ports for USB 2.0, 2 USB 2.0 Ports and 2 ports for USB 2.0. USB 2.0 Port (only five volts of power and up to 1.5A). A complete 1Gbps LAN connection is present along with audio output and input ports. The TB250BTC PRO has 12 native PCIe slots that will support HTML0. support up to 12 graphics cards.


BIOSTAR TB250-BTC PRO increases the mining efficiency by 200 percent. It increases the profit with less time to invest and improves return levels. It improves mining efficiency with its incredible hash rate and mining efficiency. Biostar assures you that you will achieve the most efficient results in 79 days.

Other brands use smaller and tight arrays for their PCI slots, making it easy to over-voltage and impact stability when they are in maintenance and other problems such as displays not being recognized. The BIOSTAR TB250-BTC PRO has a matrix arrangement to the PCI-E slots that allow for maximum and sufficient space between slots for efficient management and layout.

Each daughter card doesn’t interfere with neighboring slots. This means that there is more stability in signals between and to the board and devices that you can connect via the slots. BIOSTAR uses its own PRO Series standards on the TB250-BTC PRO, which features an all-solid capacitor setup as well as a robust power management module. This ensures a high-quality power supply and performance even when there are 12 cards operating simultaneously.

The BIOSTAR TB250BTC PRO is the only motherboard of its kind that permits 12 GPUs per motherboard. This makes it the ideal option for those who want to begin earning money. It’s a great opportunity for miners across the globe and is one of the best mining motherboards for 2022.

GigaByte GA-H1 10-D3A

The GA-H110 is the most current MoBo made by Gigabyte. It is designed to run the most recent Intel CPUs. It also includes DDR4 RAM as well as the latest M.2 Storage that is five times more efficient than SATA 3.

Body and Design

The motherboard is built with GIGABYTE’s “Ultra Durable” components, which GIGABYTE declares have been tested to ensure long-term usage. The motherboard has two slots for RAM, four SATA Gbps ports, and five PCI-Express x1 slots.

In addition, there is a parallel port, a serial port, a VGA port, 2 USB 3.0 ports, and two USB2 ports. And a Realtek Gbe LAN RJ45 port and Realtek ALC887 audio based on ALC887 is also in the motherboard.

As with other boards for mining, there are numerous PCIe slots. Multiple slots for PCIe x1 on mining motherboards make it cost-effective to include more video cards in the same system instead of expanding to more systems.


GA-H110D3A has been protected with greater protection thanks to the glass cloth PCB. PCB stands for Printed Circuit Board, which is the component on the motherboard which connects the main components. It is typically very vulnerable to temperature, humidity, and other physical impacts. So an extra layer of protection always comes in handy.

It is important to remember that most mining rigs come with open cases. The motherboard also features electrical, power loss, and high-temperature protection. All modern motherboards hold some protection against damage mechanisms. It seems that Gigabyte has taken this subject seriously and equipped this motherboard with top-of-the-line security features.

Fortunately, GA H110-D3A has an upgraded cooling mechanism. The heat sinks are positioned in a manner to disperse heat from the hottest parts and are also larger than those you see on other motherboards. It is quite impressive making it one of the best mining motherboards in 2022.


Mining is still in operation as we enter 2022. Mining and cryptocurrency are still among the best alternatives from a popular perspective. Motherboards come with various capacities for storing GPUs. Some have six PCIe slots and others 13, 7, etc.

Remember that your motherboard is the core of your mining machine. It’s, therefore, crucial to ensure that your motherboard can keep everything in good order. For those who want the most enjoyable experience to achieve the highest level of their mining endeavors. This list of best mining motherboards for 2022 above will give you access to an improved experience.

Add a Comment

Your email address will not be published. Required fields are marked *